The Air Cushion
All Air Cushion orders will be sent out with instructions to assist in the
customers use of the product, along with an inflator.
There are two methods to inflate The Air Cushion, please see below:
Method 1:
1) Open the pressure relief valve (black cap located directly under the inflate tag).
2) Back to the other side, find the air cell next to the inflate tag ()this air cell should be harder than all of the others)
3) Once this been located, press down repeatedly until you reach your desired air capacity (60-80% is Padser's recommended capacity for best comfort).
Method 2:
1) Locate the air pump - supplied with The Air Cushion.
2) Next, locate the air nozzle on the underside of the deflate tag - remove just the top lip of the air nozzle.
3) Place the air pump into the air nozzle (make sure this is firmly held in place) - then you can begin pumping the air pump, inflating to your desired pressure.
How to deflate (for partial pressure release):
1) If you have pumped too much air into The Air Cushion and would like to remove some - then start by removing the black lid from the pressure relief valve so you are presented with a red button.
2) Press this red button down repeatedly to remove air pressure from the product.
How to deflate (full deflation):
1) To fully deflate The Air Cushion - remove the second lid (Bottom) of the air nozzle and squeeze down on The Air Cushion to release pressure.
Air Shoulder Strap:
The Air Shoulder Strap is permanently inflated. Simply just attach the
product to your backpack straps using the Velcro and assure the strap is
covering your shoulder for maximum comfort.
